Platform

MSP questions

The questions MSP owners ask, answered.

Short, practical answers on billing, backups, security coverage, licences, pricing, margins, renewals and reporting, each linked to a full guide.

PricingMSP pricing: models, a simple formula and a free calculator

How much should an MSP charge per user?

There is no single right number: it depends on the services included, your tool costs and the hours each user needs. Work it out from your own cost per user and your target margin with the formula in this guide, then compare it with your market.

Per user or per device: which MSP pricing model is better?

Per user is simpler for clients and fits businesses where people use several devices. Per device fits environments where the work follows the hardware, such as servers or shared machines. Many MSPs use per user for support and per device for servers and backup.

What margin should an MSP target?

Many MSPs aim for a gross margin of around 50% or more on managed services, but the right target depends on your overhead and growth plans. Whatever the target, measure the real margin per agreement, not only the average.

Read the full guide

QBRThe MSP quarterly business review: an agenda and template that work

What is a QBR for an MSP?

A quarterly business review is a regular meeting where a managed service provider reviews with a client what was delivered, the risks found and the recommendations for the next quarter, so the service is tied to the client's business goals.

Should every client get a QBR?

Not always every quarter. Many MSPs hold quarterly reviews for larger clients and twice-yearly or yearly reviews for smaller ones, and always hold one before a renewal.

What should not be shown in a QBR?

Your internal numbers: margins, vendor costs, labour hours and unresolved billing differences. Use them to prepare the proposal, but keep the client report to delivery, risks and recommendations.

Read the full guide

RevenueMSP revenue leakage: where it hides and how to find it

What is revenue leakage for an MSP?

It is recurring revenue the MSP earned but did not invoice, or invoiced at the wrong amount, caused by differences between contracts, delivered services and invoices.

How often should an MSP check for revenue leakage?

Monthly, before invoices are sent. Many MSPs also run checks after onboarding, offboarding and price changes.

Read the full guide

MSP softwareMSP software explained: the tools an MSP runs on, and the gaps between them

What is the difference between a PSA and an RMM?

A PSA manages the business side (clients, agreements, tickets, time and billing), while an RMM manages the technical side (monitoring, patching and managing devices). Most MSPs use both.

Does Revtein replace my PSA or RMM?

No. Revtein connects to them and to your backup, security and accounting tools, compares what they say, and helps you fix the differences. Changes to your systems happen only after approval.

What is the best MSP software?

There is no single best tool: the right PSA and RMM depend on your size, services and integrations. What matters most is that the tools agree with each other, which is the gap Revtein checks.

Read the full guide

ContractsManaged services agreement: what to include, with a checklist

What is a managed services agreement?

It is the contract between an MSP and a client that defines the services provided, their quantities and prices, service levels, exclusions, and the term and renewal of the relationship.

How long should an MSP contract be?

Many MSP agreements run for one to three years, often with automatic renewal and a notice period. Longer terms give stability; shorter terms give flexibility. Whatever the length, include a yearly price review.

Is this guide legal advice?

No. It describes what MSPs commonly include. Have your agreement written or reviewed by a lawyer in your country.

Read the full guide

MarginHow to measure MSP agreement profitability

What is a good direct margin for an MSP agreement?

It depends on your services and target. Set your own target, then review the agreements below it. The key is measuring consistently and only where costs are known.

Should labor be included in agreement margin?

Yes, for direct margin. Labor is often the cost that grows silently when a contract is under-scoped.

Read the full guide

BillingMSP billing reconciliation: the four numbers that must agree

What is the difference between delivered and billable?

Delivered is what you actually provide. Billable is what the agreement says should be charged for it, which can differ because of minimums, bundles or exclusions.

Should I reconcile before or after invoices are sent?

Before. Correcting a draft is simple. Correcting an issued invoice needs an accounting adjustment.

Read the full guide

LicencesMicrosoft 365 license reconciliation for MSPs

Why do Microsoft 365 licence counts drift for MSPs?

Because the tenant, the distributor subscription and the client invoice are updated by different people at different times.

Do I need a distributor connection to reconcile licences?

No. A CSV or Excel cost file can be imported and is labeled as file evidence.

Read the full guide

Monthly closeThe MSP monthly close checklist

When should an MSP do its monthly close?

Before recurring invoices are sent, so differences are fixed on drafts rather than corrected on issued invoices.

Why keep a snapshot of the closed month?

It records what was checked, what was accepted and what could not be verified, so the same questions do not need to be rebuilt later.

Read the full guide

RenewalsAn MSP contract renewal playbook

How far ahead should an MSP start a renewal?

Many teams start around 120 days out and prioritize agreements ending within 30 days.

Why separate the internal review from the client proposal?

So the client never sees costs, margins or internal notes, while your team still works from one set of facts.

Read the full guide

Unbilled devicesHow to find devices you manage but do not bill

How do MSPs find unbilled devices?

Compare the managed devices per client in the RMM with the billed quantity on the PSA agreement and the last invoice. Every client where the RMM count is higher has devices delivered but not billed.

How often should an MSP reconcile devices against billing?

Every month, before invoices go out. Device counts change weekly, so a quarterly check lets months of unbilled work pass.

Should I bill devices retroactively?

Usually not without the client's agreement. Most MSPs bill new devices from the next cycle, explain the change, and credit devices billed but no longer managed.

Read the full guide

KPIsMSP financial KPIs: the numbers worth tracking every month

What KPIs should an MSP track?

Monthly recurring revenue, gross margin per agreement, effective hourly rate, revenue leakage and the renewal pipeline are a strong core set.

What is a good gross margin for an MSP?

Many MSPs target around 50% or more on managed services; what matters is the margin of each agreement, not only the average.

How do I measure revenue leakage?

Compare what you deliver (RMM, licences, backup) with what agreements bill and what invoices show; the value of the difference is your leakage.

Read the full guide

Price increasesHow to raise your MSP prices without losing clients

How much should an MSP raise prices?

As much as the margin of each agreement needs to reach your target, not a flat rate for everyone. Some clients need a larger change, some none.

How much notice should I give clients for a price increase?

What the agreement requires, and in practice at least 30 to 60 days, so the client can plan the new cost.

Will a price increase make clients leave?

A clear reason, the new total and a track record of verified service make an increase easier to accept than a surprise on the invoice.

Read the full guide

Microsoft 365How to pass on Microsoft 365 and licence price increases

Can an MSP pass on a Microsoft 365 price increase?

Yes, if the agreement allows third-party price changes to be passed through, usually with written notice. If the price is fixed for the term, the increase is absorbed until renewal.

How do I tell clients about a licence price increase?

In writing, before the invoice: the product, old and new price, the date, that it comes from the vendor, and the effect on their total monthly bill.

What if my contract does not mention licence price changes?

Talk to the client now and add a pass-through clause at the next renewal, so future increases follow a known process.

Read the full guide

BackupHow to audit the backups you bill for

How often should an MSP check client backups?

Daily alerts catch individual failures, but a monthly audit per client is what proves coverage: every covered device protected and backed up inside the agreed window.

What counts as a recent backup?

The window your agreement or internal standard sets, often 24 or 48 hours for servers. Use the time of the last successful job, not the last attempt.

Should MSPs bill for backup when it failed?

The cleaner answer is to make sure it does not fail unnoticed: audit coverage monthly, fix gaps, and show the client the verified result.

Read the full guide

SecurityHow to find managed devices without endpoint protection

How do I find devices without EDR?

Compare the RMM's managed device list per client with the security tool's list of active agents. Devices in the first list and not the second are unprotected.

How long can an agent be offline before it is a problem?

Set a threshold that fits the client, often a few days for workstations and less for servers, and treat anything longer as a gap to investigate.

Is endpoint protection coverage a billing issue too?

Often. Devices protected but not billed, or billed but not protected, show up in the same comparison, so check the agreement when you fix coverage.

Read the full guide

ConnectWiseHow to audit ConnectWise agreement additions against what you deliver

Where does ConnectWise PSA store what a client is billed for?

In agreements and their additions: each addition has a product, a quantity and a price that drive recurring invoices.

How do I check ConnectWise additions against device counts?

Map each company to its RMM site, then compare the addition quantity for managed devices with the RMM count for that client every month.

Can Revtein update ConnectWise for me?

Today Revtein gives your team the exact values to update in ConnectWise PSA and then reads it again to confirm; it writes directly in HaloPSA.

Read the full guide

AutotaskHow to audit Autotask contract services against what you deliver

Where does Autotask store recurring billing quantities?

On recurring service contracts: each service has units and a price that drive the recurring invoice.

When should I update Autotask units?

Before the billing run each month, after comparing them with what the RMM and other tools show you deliver.

Does Revtein change Autotask contracts?

Today Revtein gives your team the exact values to set in Autotask and confirms them on the next read; it writes directly in HaloPSA.

Read the full guide

DistributorsHow to reconcile distributor bills with what you bill clients

How do MSPs reconcile Pax8 invoices?

Match each Pax8 line by customer and SKU to the client's agreement, then compare quantity and price; differences are licences not billed, old prices or orphan subscriptions.

How often should distributor bills be reconciled?

Monthly, when the bill arrives and before client invoices go out.

What is an orphan subscription?

A licence you still pay the distributor for, for a client or user who no longer needs it; cancel it or assign it to the right client.

Read the full guide

Scope creepScope creep in managed services: how to measure it and fix it

What is scope creep for an MSP?

Work delivered beyond what the agreement prices: more devices, more users, out-of-scope requests or more support hours, without a change in the fee.

How do I measure scope creep?

Compare labour hours and tool costs per agreement with the assumptions behind its price; a falling real margin is the clearest sign.

How do I stop scope creep without upsetting clients?

Bill what is delivered, quote out-of-scope work as projects, and reprice at renewal with the numbers in hand.

Read the full guide

Client reportsWhat to put in a monthly MSP client report

What should an MSP monthly report include?

Services delivered against the agreement, issues found and fixed with proof, open risks with a recommendation, and what changes next month.

Should an MSP report show ticket counts?

Sparingly. Clients care more about outcomes, such as verified backups and fixed issues, than about how many tickets were closed.

What should never be in a client report?

Your margins, vendor costs, labour costs and internal notes.

Read the full guide

Renewal riskHow to spot a client at risk before the renewal

When should an MSP prepare for a renewal?

About 90 days before the end date, or before the notice deadline if the contract has one.

What are the signs a client will not renew?

Unresolved service issues, billing errors, late payments and silence: fewer meetings and slower replies.

Should I raise prices at renewal for an at-risk client?

Fix service and billing issues first; then price from the real margin with the value you delivered in hand.

Read the full guide

Know what needs to change. See it through.

Reserve your spot for launch. Tell us who you are and what you would use Revtein for, and we will email you the day it opens, with a 7-day free trial of the full platform.